JET Guitars Control Layouts

JET Guitar Control Layouts

Home > All Guitars > JET Guitars
JET Guitars
Standard Control Layouts
JET Guitars are the Absolute Best Guitars Available
Custom Layouts Available !!!!!

Earlewood Layout #1

Volume, Angled Megaswitch, and Tone. The switch, made in Germany by Schaller, gives standard Bridge or Neck pickup, plus single coil sounds. This layout requires a body thickness of 1.70" or more.


Earlewood Layout #2

Volume, Tone, and Megaswitch. This layout allows for a thinner body. Incidentally, the tone control is usually a master, but can be wired to exclude the neck or bridge pickup.

Earlewood Layout #3

Angled Megaswitch, Volume, and Tone. Volume is normally the knob at the far end of the switch throw. A thinner body would accommodate this layout.
.

Earlewood Layout #4

Volume, Straight Megaswitch, and Tone. This layout requires a body thickness of 1.70" or more.

Earlewood Layout #5

Volume, Tone and Toggle Switch. A Push/Pull pot can be used to select single coil mode.

Earlewood Layout #6

3 Knobs and Toggle Switch. Choose either 2 Volume / 1 Tone or 1 Volume / 2 Tone. You can have a thinner body with this layout, also. A special capacitor can be used for the bridge pickup tone control, to give it a more throaty midrange tone. This sounds great with distortion!

Caldera Layout #7

Toggle Switch in Upper Bout, and 2 Volume / 2 Tone. The V/T for the bridge pickup is normally the row closest to the bridge. The upper Tone is a P/P pot to select single coil mode. A special capacitor is used for the bridge pickup tone control, giving it a throaty midrange tone like a wah pedal halfway down.

Earlewood PLUS Layout #8

Toggle Switch in Upper Bout selects Piezo, Magnetics or both. Magnetic Volume / Tone, Volume for Piezo are placed near the bridge. The first knob is a P/P pot to select either of two pre-set tone curves for the Piezo.

Earlewood PLUS Layout #9

Same as above layout, except Magnetic Volume / Tone, Volume for Piezo are placed further from the bridge.

For either PLUS layout, a miniswitch may be substituted for the P/P pot to select either of two pre-set tone curves for the Piezo
.
 

Earlewood PLUS Layout #10

Same as layout #8 or #9, except the pickup selector is a second toggle switch. The P/P pot can be used either to switch to single coil mode, or to select the piezo tone curves.



 

sitemap