|
 Power
750™
4405500000
No muss, no fuss, no nonsense – just brute power. Packed with a
mighty 750 watts at 4 ohms, the Power 750 can be used to power any
SWR preamp, or augment any existing SWR head for a true multi-cab
monster rig. We like the sound of “one horsepower” better than 750
watts, but either way, it’s pretty damned loud!
Features: 750 watts @ 4 ohms/450 watts @ 8 ohms mono-block power
amp, four-stage input LED dot bar display (-20, -10, 0, +3),
balanced and unbalanced inputs, slave output, speaker on/off switch,
Speakon® and 1/4” speaker outputs.
19”W x 5.38”H x 10.5”D, 32 lbs. |
| Power 750™
|
| 44-05500-000
|
| Preamps/Power
Amps |
| Power
Amplifier |
| Up to 850
Watts (at 2.6 Ohms) of sweet, clean Hi-Fi power. |
FRONT PANEL
FEATURES
Gain Control
4 segment LED dot bar display (-20, -10, 0, +3)
Power On/Off Switch
Speaker On/Off Switch
LED "On" indicator
Rack Handles
Aluminum chassis with steel reinforced corners
Chromed steel front panel
REAR PANEL FEATURES
1/4" Input Jacks
Slave Outputs
Two 1/4" Speaker Output Jacks
Two Speakon® Speaker Output Jacks
Speaker fuse: 3AG, 10 Amp, Fast Blo
Line Fuse: 3AG, 8 Amp, Slow Blo
A/C cord receptacle
INTERNAL FEATURES
The Power 750 features a quazi-complimentary design utilizing Sanken
flat-packed power transistors and a standard iron laminated core
transformer. |
850 Watts @
2.6 ohms
750 Watts @ 4 ohms
450 Watts @ 8 ohms
(minimum load = 2.6 ohms) |
| N/A |
| N/A |
| 1 Channel
|
| Master Level
|
| Steel (with
polished aluminum faceplate) |
| 32 lbs.
|
Height: "
Width: "
Depth: " |
| N/A |
| N/A |
| N/A |
| N/A |
| N/A |
(@ 850 watts
RMS) -3dB @ 20 Hz and 40 kHz
< .026% THD, 1 kHz @ 8 ohms
< .13% THD, 20 Hz to 20 kHz @ 8 ohms
Intermodulation Distortion = .07% |
| N/A |
| N/A |
| N/A |
Balanced =
10K ohms
Unbalanced = 33K ohms |
| Slave Output
= 100 ohms |
| 1.582 VRMS
|
Residual =
<.00072 volts (720 millivolts)
Signal to noise ratio = <-100 dB |
|