|
 Megoliath™
4410100000
It goes lower, gets louder, cuts harder and blows hair backwards …
This is not your father’s 8x10. The Megoliath represents the
cutting-edge in innovative bass speaker cabinet design, created for
the player who demands ultimate performance at high volume levels,
as well as the discriminating bassist who requires flexibility when
utilizing effects. Triple-ported for incredibly low frequency
response (-3db @ 37Hz), and specially designed to emphasize the
right midrange frequencies for rock players, nothing makes a
statement like an SWR Megoliath 8x10.
Features: 8x10 stereo/mono enclosure, 600 watts handling each
section stereo, 1200 watts handling mono, custom SWR speakers, horn
tweeter with attenuator, multiple Speakon® and 1/4” speaker jacks,
heavy duty casters, top (metal grab bar) and bottom (inset) handles,
rear skid rails, vibration-free shock-mounted chrome grill, front
and rear ports. Impedance: 2 x 8 ohms (stereo), 4 ohms (mono). |
| Megoliath™
|
| 44-10100-000
|
| Goliath Series
|
| Bass Speaker
Enclosure |
The Megoliath,
which can easily handle 1200 watts of power, represents the cutting
edge in bass speaker cabinet design. It was created for the player
who demands ultimate performance at high volume levels, as well as
the discriminating bassist who requires flexibility when utilizing
effects. Groundbreaking in design, the Megoliath was constructed
with two independent compartments that each house four 10 inch
custom SWR® speakers. This design enables the cabinet to be run in
either stereo or mono. In stereo mode a signal can be split into two
different sections of the cabinet for true stereo separation. In
mono, all 8 speakers work together to create a truly massive sound.
Very much like the SWR Goliath III™, the upper section of the
Megoliath is a 4x10 enclosure equipped with a standard SWR tweeter.
The lower section has the same 4x10 speaker design but without the
tweeter. Stereo signals are routed to the appropriate speaker
section to obtain the optimum sound for the player's application.
For example, distortion, which sounds best when used without a
tweeter, can be run through the bottom half of the Megoliath.
Effects such as reverb, chorus, and delay are sent to the top half
of the Megoliath. This unique SWR feature allows the player to
achieve optimum efficiency from effects while still retaining the
"bottom end" of the true bass signal.
Although it is large by nature, the Megoliath was designed by the
engineering team at SWR to offer maximum portability. It comes
equipped with several unique SWR features that make transportation
simple. These features include Grab Bar handles on its top and heavy
duty casters on its bottom, inset handles located on the bottom of
the cabinet for lifting, and skids on the back for pushing it onto a
stage or into a vehicle. |
Carpeted 8x10
speaker enclosure with tweeter.
Tilt back design for easy transportation.
Can be run as a single 4 ohm, 8x10 enclosure or as a dual, 8 ohm,
4x10 enclosure.
Grab Bar Handles,
Recessed Castors,
Skid Rails,
Kick Plate,
Stacking Corners |
| N/A |
Mono Cabinet
Mode: 4 Ohms
Dual Cabinet Mode: 8 Ohms (each chamber) |
| Four 10 inch
custom SWR speakers, P/N 0067081000 |
| N/A |
| High Frequency
Attenuator |
| Black Carpet
with Chrome Stamped Steel Vibration-Free Grille |
| 145 lbs. |
Height: 48.5"
Width: 26.5"
Depth: 20.25" |
Mono Cabinet
Mode: 1200 Watts
Dual Cabinet Mode: 600 Watts (each chamber) |
| N/A |
| The Megoliath
comes equipped with a custom-length 2 1/2' Speakon® -to-Speakon
cable for mono operation. |
| Uses Cover P/N
0066182000, US MSRP $79.95 (Not Included) |
| N/A |
| 100 dB SPL @
1W1M (-3dB @ 37 Hz & 13 kHz) |
| 100 dB SPL @
1W1M (-3dB @ 37 Hz & 13 kHz) |
| N/A |
| N/A |
| N/A |
| N/A |
| N/A |
| N/A |
|