Peavey Valve King Series Amplifiers

Peavey ValveKing® amps feature a patented, variable Class A-A/B control called Texture™, which allows sweepable selection between Class A and Class A/B power structures, as well as any combination of the two. With this feature, guitarists can coax virtually any tone from this tweaked-out amplifier. The amp's preamp and power sections use 12AX7 and 6L6GC tubes, respectively.

Additional standard features include two footswitchable channels with independent, three-band EQ and volume, plus a footswitchable gain/volume boost on the lead channel to provide extra volume for solos. ValveKing amps also feature global resonance, presence and reverb controls, a buffered effects loop and dual speaker jacks in parallel (head and 212 only).

Features

• 100 watts (rms) into 16, 8, or 4 ohms (switchable)
• Four 6L6GC and three 12AX7 tubes
• Two independent footswitchable channels
• Separate EQ for each channel
• Footswitchable gain/volume boost on lead channel
• Dual paralleled speaker jacks
• Reverb with level control
• Buffered effects loop
• Resonance and presence controls
• Patented Texture™ variable Class A simulation control

Specifications

Dimensions
26.25" W x 9.625" H x 11.125" D (Unpacked)
30.875" W x 14.75" H x 16" D (Packed)
Weight
48 lbs. (Packed)
40.5 lbs. (Unpacked)

Peavey ValveKing® amps feature a patented, variable Class A-A/B control called Texture™, which allows sweepable selection between Class A and Class A/B power structures, as well as any combination of the two. With this feature, guitarists can coax virtually any tone from this tweaked-out amplifier. The amp's preamp and power sections use 12AX7 and 6L6GC tubes, respectively, and drive specially voiced 12" ValveKing® loudspeakers (112 and 212 versions only).

Additional standard features include two footswitchable channels with independent, three-band EQ and volume, plus a footswitchable gain/volume boost on the lead channel to provide extra volume for solos. ValveKing® amps also feature global resonance, presence and reverb controls, a buffered effects loop and dual speaker jacks in parallel (head and 212 only).

Features

• 50 watts (rms) into 16 ohms
• Two 6L6GC and three 12AX7 tubes
• Two independent footswitchable channels
• Separate EQ for each channel
• Footswitchable gain/volume boost on lead channel
• External speaker capability
• 12 inch ValveKing® speaker
• Reverb with level control
• Buffered effects loop
• Resonance switch for "tight or loose" cabinet response
• Patented Texture™ variable Class A simulation control

Specifications

Dimensions
21.125" W x 18" H x 10.062" D (Unpacked)
25.125" W x 22" H x 14.25" D (Packed)
Weight
45.5 lbs. (Packed)
41 lbs. (Unpacked)

Peavey ValveKing® amps feature a patented, variable Class A-A/B control called Texture™, which allows sweepable selection between Class A and Class A/B power structures, as well as any combination of the two. With this feature, guitarists can coax virtually any tone from this tweaked-out amplifier. The amp's preamp and power sections use 12AX7 and 6L6GC tubes, respectively, and drive specially voiced 12" ValveKing® loudspeakers (112 and 212 versions only).

Additional standard features include two footswitchable channels with independent, three-band EQ and volume, plus a footswitchable gain/volume boost on the lead channel to provide extra volume for solos. ValveKing® amps also feature global resonance, presence and reverb controls, a buffered effects loop and dual speaker jacks in parallel (head and 212 only).

Features

• 100 watts (rms) into 16, 8, or 4 ohms (switchable)
• Four 6L6GC and three 12AX7 tubes
• Two independent footswitchable channels
• Separate EQ for each channel
• Footswitchable gain/volume boost on lead channel
• Dual paralleled speaker jacks
• Two 12 inch ValveKing® speakers
• Reverb with level control
• Buffered effects loop
• Resonance and presence controls
• Patented Texture™ variable Class A simulation control

Specifications

Dimensions
26.375" W x 20.625" H x 11.062" D (Unpacked)
31.125" W x 25.75" H x 15.5" D (Packed)
Weight
74 lbs. (Packed)
64.5 lbs. (Unpacked)

The Peavey ValveKing® Series is a new, all-tube guitar amp line combining boutique features and hot-rodded tones with legendary Peavey reliability.

 

 

 

 

 

Features

• Birch construction
• 16 ohms mono with dual input jacks for connecting additional cabinets
• Four 12 inch ValveKing® speakers
• Rear-mounted speakers
• 400 watts continuous power handling
• Straight and slant versions available
• PLEASE NOTE: This item only available for in-store pickup

Specifications

Dimensions
29.75" W x 31.875" H x 14.25" D (Unpacked)
33" W x 35.25" H x 17" D (Packed)
Weight
85.5 lbs. (Packed)
77 lbs. (Unpacked)

The ValveKing® Royal 8 is a true class A guitar amplifier designed to give players the punchy dynamics and tones that inspired rock 'n' roll's greatest riffs.

Perfect for rehearsing, the Royal 8 features a simple interface of a single tone control, dual inputs and master volume and gain controls that can be adjusted for either class A "breakup" power-amp tones-achieved by reducing the gain and increasing the master volume-or preamp distortion, which players can access by reducing the master volume and cranking the gain. This single-channel design emphasizes the dynamic relationship of the power-amp components to produce volume and headroom that belies its small size and wattage.

Features

• This true Class A amp uses EL84/6BQ5 output tube and one 12AX7/ECCC83 preamp tube with no negative feedback in the power amp
• 5 watts into 8 ohms
• Gain and master volume
• Tone control
• 8 inch speaker
• High and low gain inputs